Olivetti d-Color MF2001 Service Manual page 154

Code
Sequence error 6
7963
DP original conveying jam
9001
DP original switchback jam
9004
DP open
9010
DP top cover open
9011
DP paper feed sensor stay
9110
jam
DP registration sensor non
9200
arrival jam
DP timing sensor non arrival
9400
jam
DP timing sensor stay jam
9410
*: Refer to figure 1-4-1 for paper jam location (see page 1-4-1).
Service Manual
Contents
The finisher does not deliver the eject-complete
command in 15 seconds after the bridge eject
sensor is turned off.
DP timing sensor (DPTS) turns off within the speci-
fied time since the sensor turns on.
During duplex switchback scanning, the DP regis-
tration sensor (DPRS) does not turn on within
specified time of the DP timing sensor (DPTS)
turning off.
The DP is opened during original feeding.
Sensor in the conveying system is on when the
power is turned on or the cover is closed.
The DP top cover is opened during original feed-
ing.
The DP paper feed sensor (DPPFS) or DP regis-
tration sensor (DPRS) does not turn off within the
specified time of the DP timing sensor (DPTS)
turning on.
The DP registration sensor (DPRS) does not turn
on within the specified time of the DP paper feed
sensor (DPPFS) turning on.
The DP timing sensor (DPTS) does not turn on
within the specified time of the DP registration sen-
sor (DPRS) turning on (Retry 5 times).
The DP timing sensor (DPTS) does not turned off
within the specified time its turning on.
Conditions
1-4-8
2KZ/2K0
Jam
location*
G
J
J
-
-
J
J
J
J
Y113010-4