Touch Panel - Sharp AR-M450 Service Manual

3. Touch Panel

A. Basic screen of copy mode
When the copy mode key is pressed, this display screen will appear showing the basic copy mode selections.
READY TO SCAN FOR COPY.
SPECIAL MODES
2-SIDED COPY
OUTPUT
"
1 Message display
2 [INTERRUPT] key display area
3 Copy quantity display
4 [2-SIDED COPY] key
5 [OUTPUT] key
6 [SPECIAL MODES] key
7 Paper size display
8 Original size display
9 Exposure display and
[EXPOSURE] key
10 Paper select display and
[PAPER SELECT] key
11 Copy ratio display and
[COPY RATIO] key
A4
# $
Basic status messages are displayed here.
When interrupt copy is available, the [INTERRUPT] key will be displayed here.
When an interrupt copy job is being run, a [CANCEL] key will be displayed here to be used for canceling the
interrupt copy job.
Displays the selected number of copies before the [START] key is pressed or the number of completed
copies after the [START] key is pressed.
A single copy can be made when "0" displayed.
Touch to display the duplex copy mode setting screen. A highlighted selection on the screen will indicate the
currently selected mode. The setting screen can be closed by touching the [OK] key on the setting screen
whether or not a selection change was made.
Touch to display the output mode setting screen. A highlighted selection on the screen will indicate the
currently selected mode. The setting screen can be closed by touching the [OK] key on the setting screen
whether or not a selection change was made.
Touch to display the special modes selection screen.
The display shows the location of the paper trays, the size of the paper in the trays and the approximate
amount of paper loaded in each tray. The approximate amount of paper in a tray is indicated by
The original paper size will be displayed when originals are placed on the document glass or in the
document feeder.
A touch of the [EXPOSURE] key will open the exposure selection window.
A highlighted key on the exposure window indicates which exposure mode (AUTO, TEXT, TEXT/PHOTO or
PHOTO) is currently selected. When an exposure mode other than AUTO is selected, an exposure level
scale will also appear in the window.
Displays the selected paper size. When the auto paper select mode has been selected, "AUTO" will be
displayed.A touch of the [PAPER SELECT] key will open the paper selection window. When a selection is
made, the selection window will close. To close the window without making a selection touch the key again
Displays the selected copy ratio. Touch to display the reduction and enlargement copy ratio selection
screen.
AR-M350 EXTERNAL VIEWS AND INTERNAL STRUCTURES 5-3
ORIGINAL A4
A4
1.
A4
2.
A3
3.
A4R
4.
% &
!
AUTO
EXPOSURE
AUTO A4
PAPER SELECT
100%
COPY RATIO
'
.