Sharp AR-M450 Service Manual page 100

46-11
Purpose Adjustment
Function (Content) Used to adjust the print density for each density
level (display value) in the copy mode
(binary-Photo mode).
A desired reading density can be set for each
density level (display value).
Section
Item Picture quality
Operation/Procedure The exposure mode to be set is selected.
(Photo mode)
1) The current set value is highlighted on the
right side of each item. In this screen, be sure
to select "1: COPY START." (Set value: 1)
2) Set the exposure level with 10 digit key pad.
Press P to store the set value.
(Default: 50, set range: 0 - 99)
3) Press START, and copying is started and the
set value is stored. (Display value 1)
4) Select a paper feed tray. (Set value 2)
5) Select an exposure level. (Set value 3)
SIMULATION 46-11
EXP. LEVEL SETUP (PHOTO2). SELECT 0-11, AND PRESS START.
0. TRAY SELECT 1 1. COPY START
1
2. EXP LEVEL
50 50
3. 1.0 4. 1.5
50 50
6. 2.5. 7. 3.0
50 50
9. 4.0 10. 4.5
Select other than 0 - 2,
and press [START] key.
SIMULATION 46-11
EXP. LEVEL SETUP (PHOTO2),INPUT VALUE 0-99, AND PRESS START.
1. 1.0
Select 1, and
Press [START] key.
press [START] key.
SIMULATION 46-11
EXP. LEVEL SETUP (PHOTO2). NOW COPYING.
Select 0, and
press [START] key.
SIMULATION 46-11
EXP. LEVEL SETUP (PHOTO2). SELECT 1-5, AND PRESS START.
(FEED TRAY)
1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4
5. BPT
Select 2, and
press [START] key.
SIMULATION 46-11
EXP. LEVEL SETUP (PHOTO2). SELECT 3-11, AND PRESS START.
(EXP. LEVEL SELECT)
3. 1.0 4. 1.5
6. 2.5 7. 3.0
9. 4.0 10. 4.5
1
50
5. 2.0
50
8. 3.5
11. 5.0
50
Press [CUSTOM SETTING] key.
50
Press [CUSTOM SETTING] key.
Or copying is terminated.
Press [START] key or
press [CUSTOME SETTING] key.
1
Press [START] key or
press [CUSTOME SETTING] key.
1
5. 2.0
8. 3.5
11. 5.0
AR-M350 SIMULATIONS 10-39
<List of set values 1>
0 Paper feed tray selection
1 Copy start (Default)
2 Exposure level selection
3 Exposure level 1.0
4 Exposure level 1.5
5 Exposure level 2.0
6 Exposure level 2.5
7 Exposure level 3.0
8 Exposure level 3.5
9 Exposure level 4.0
10 Exposure level 4.5
11 Exposure level 5.0
<List of display values 1>
Normal display
ERROR display Door open
Jam
paper empty
<List of set values 2>
1 TRAY1
2 TRAY2
3 TRAY3
4 TRAY4
5 Manual feed
<List of set values 3>
3 Exposure level 1.0
4 Exposure level 1.5
5 Exposure level 2.0
6 Exposure level 2.5
7 Exposure level 3.0
8 Exposure level 3.5
9 Exposure level 4.0
10 Exposure level 4.5
11 Exposure level 5.0
NOW COPYING
DOOR OPEN.
JAM
PAPER EMPTY.