Sharp AR-M450 Service Manual page 110

50-2
Purpose Adjustment
Function (Content) Used to adjust the copy image position and the
void area (image loss) on print paper in the copy
mode.
(This simulation is a simpler procedure compared
to the similar adjustment using SIM 50-1.)
Section
Item Picture quality
Operation/Procedure Perform the copy lead edge adjustment.
1) The current set value is highlighted on the
right of each item. In this screen, be sure to
select "1: COPY START." (Set value: 1)
2) Enter the correction value with 10 digit key
pad.
Press P to store the set value.
3) Press START to start copying and store the
set value. (Display value: 1)
4) Set the scan magnification ratio.
(Set value: 3)
SIMULATION 50-2
LEAD EDGE ADJUSTMENT(CALC). SELECT 0-9, AND PRESS START.
0. TRAY SELECT 1 1. COPY START
400
2. MAGNIFICATION
3. L1 4. L2
320 105
6. IMAGE LOSS(SIDE) 20
30
7. DENB 20 8. DENA
Select other than 0 - 2,
and press [START] key.
SIMULATION 50-2
LEAD EDGE ADJUSTMENT(CALC). INPUT VALUE 0-99, AND PRESS START.
3. L1
Select 1, and
Press [START] key.
press [START] key.
SIMULATION 50-2
LEAD EDGE ADJUSTMENT(CALC). NOW COPYING.
Select 0, and
press [START] key.
SIMULATION 50-2
LEAD EDGE ADJUSTMENT(CALC). SELECT 1-5, AND PRESS START.
(FEED TRAY)
1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4
5. BPT
Select 2, and
press [START] key.
SIMULATION 50-2
LEAD EDGE ADJUSTMENT(CALC).
(MAGNIFICATION)
INPUT 25-400(%)
5. IMAGE LOSS(LEAD) 15
20
30
9. FR_VOID
Press [CUSTOM SETTING] key.
50
Press [CUSTOM SETTING] key.
Or copying is terminated.
Press [START] key or
press [CUSTOME SETTING] key.
1
Press [START] key or
press [CUSTOME SETTING] key.
100
AR-M350 SIMULATIONS 10-49
<List of set values 1>
0 TRAY SELECT
1 COPY START
2 MAGNIFICATION Print magnification ratio
3 L1
4 L2
5 IMAGE LOSS
(LEAD)
6 IMAGE LOSS
(SIDE)
7 DENB
8 DENA
9 FR_VOIDFR
<List of display values 1>
Normal display
2 ERROR display
<List of set values 2>
1 TRAY1
2 TRAY2
3 TRAY3
4 TRAY4
5 Manual feed
<List of set values 3>
Set range 25 - 400%
Default Set range
Paper feed tray selection
Copy start (Initial value)
setup
Document scan start
position adjustment
Resist roller clutch ON
timing adjustment value
Rear edge void quantity 15
adjustment value
Lead edge image loss 20
quantity set value
Side image loss quantity 35
set value
Lead edge void quantity 35
set value
Void quantity adjustment 35
value
NOW COPYING
Door open DOOR OPEN.
Jam JAM
Paper empty PAPER EMPTY.
- 1 ~ 5
-
25 ~ 400
-
0 ~ 999
-
0 ~ 999
-
0 ~ 99
0 ~ 99
0 ~ 99
0 ~ 99
0 ~ 99