Sharp AR-M450 Service Manual page 86

Main code 24
24-1
Purpose Data clear
Function (Content) Used to clear the misfeed counter, misfeed
history, trouble counter, and trouble history.
(After completion of maintenance, these
counters must be cleared.)
Section
Item Counter
Operation/Procedure Select with 10 digit key pad and press START
key.
The procedure below is executed and the display
returns to the original state.
1: Counter is cleared 2: Not cleared
SIMULATION 24-1
JAM/ TROUBLE COUNTER DATA CLEAR.SELECT1-3,AND
PRESS START.
1. PAPER JAM
2. SPF JAM
3. TROUBLE
Press [START] key.
SIMULATION 24-1
PAPER JAM COUNTER DATA CLEAR.
ARE YOU SURE ?
1. YES
2. NO
<List of set values>
PAPER JAM Number of times of paper jam
SPF JAM Number of times of SPF jam
TROUBLE Number of times of troubles
24-2
Purpose Data clear
Function (Content) Used to clear the number of use (print quantity)
of each paper feed section.
Section Paper feed
Item Counter
Operation/Procedure Select with 10 digit key pad and press START
key.
The procedure below is executed and the display
returns to the original state.
1: Counter is cleared 2: Not cleared
SIMULATION 24-2
PAPER FEED COUNTER DATA CLEAR.SELECT1-6,AND PRESS START.
1. TRAY1 2. TRAY2
3. TRAY3/LCC1 2. TRAY4/LCC2
5. BPT 6. ADU
Press [START] key.
SIMULATION 24-2
TRAY1 COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
<List of set values>
1 Tray 1 use quantity
2 Tray 2 use quantity
3 Tray 3/LCC left tray use quantity
4 Tray 4/LCC right tray use quantity
5 Manual feed tray use quantity
6 Duplex paper feed use quantity
1
Press [CUSTOM SETTING] key
or [START] key.
1
1
Press [CUSTOM SETTING] key
or [START] key.
1
AR-M350 SIMULATIONS 10-25
24-3
Purpose Data clear
Function (Content) Used to clear the number of use of the staple,
DSPF and the scanner (reading) unit.
Section
Item Counter
Operation/Procedure Select with 10 digit key pad and press START
key.
The procedure below is executed and the display
returns to the original state.
1: Counter is cleared 2: Not cleared
SIMULATION 24-3
ORG./STAPLE COUNTER DATA CLEAR.SELEC1-5, AND PRESS START.
1. SPF
2. SCAN
3. STAPLER
4. PUNCH
5. STAMP
Press [START] key.
SIMULATION 24-3
SPF COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
<List of set values>
1 SPF paper passing quantity
2 Number of times of document scan
3 Number of times of stapling
4 Number of times of punching
5 Number of times of finish stamp
24-4
Purpose Data clear
Function (Content) Used to reset the maintenance counter.
Section
Item Counter
Operation/Procedure Select with 10 digit key pad and press START
key.
The procedure below is executed and the display
returns to the original state.
1: Counter is cleared 2: Not cleared
SIMULATION 24-4
MAINTENANCE COUNTER DATA CLEAR.PRESS START.
1. MAINTENANCE
Press [START] key.
SIMULATION 24-4
MAINTENANCE COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
<List of set values>
1 maintenance counter
1
Press [CUSTOM SETTING] key
or [START] key.
1
1
Press [CUSTOM SETTING] key
or [START] key.
1