Erasing An Empty Batch Box - Muratec MFX-1500E Operating Instructions Manual

Erasing an empty batch box

Batch boxes must be empty to be erased. If a box has documents stored in it, then
you first have to erase those documents. See page 2.22.
To erase an empty batch box:
1
Press / , , 5,
PROGRAM N ENTER
Select Batch Box
1:No Number Stored
2
Use the numeric keypad to enter the number (1–5) of the batch box you want
to erase. Here, we've pressed 2 and see:
Select Batch Box
2:9-1-972-5559900
3
If you want to erase a different batch box than what appears on the
that batch box's number now.
4
Press . If the batch box is empty, the
ENTER
Erase Batch Box
Check Program/Enter
Important: If you select a batch box which is not empty, the machine beeps
and briefly displays:
Select Batch Box
Document Stored
Erase any documents stored in the batch box (see page 2.22),
then go back to step 3.
Important: If you want to quit without erasing the batch box you've
selected, press /
Important: If you want to quit without erasing any batch box, press
The machine returns to standby mode.
5
Press to erase the batch box.
ENTER
Erase Batch Box
** Complete
To erase another batch box, repeat steps 2–5. To finish, press
. The shows:
LCD
Select Batch Box
or
1:9-5551023
shows:
LCD
. The fax will return to step 2.
PROGRAM
**
.
STOP
, enter
LCD
.
STOP
Beyond the Basics
2.23