Review Commands, An Introduction - Muratec MFX-1500E Operating Instructions Manual

Review Commands, an introduction

Your fax machine can store many "jobs" in its memory. And it keeps track of each one
by assigning it a command number, like "C01."
Delayed commands, redial attempts and current fax transmissions are all stored in
your fax machine's memory and given a command number.
The Review Commands function gives you the power to check on each job (or
command) in your machine's memory. It also lets you cancel a command if you
decide not to send the document.
To cancel a command:
1
Press .
REVIEW COMMANDS
The shows the first command, indicated by its command number and the
LCD
phone number it will dial. If a command is in progress, that will be the first
command the shows:
LCD
C01:5552009
Program/Cancel
2
Press or / until the command you want to cancel appears.
PROGRAM
3
Press . The shows:
CANCEL LCD
C01:5552009
Check Program/Cancel
4
If you want to cancel this command, press
5
The now shows the next command.
LCD
If you want to cancel it, too, go back to step 4.
If you don't want to cancel this command but do want to review other
commands, press /
PROGRAM
back to step 4.
If you want to stop reviewing the stored commands, press
machine to standby mode.
For more information on the Review Commands function, see page 2.18.
again.
CANCEL
until the command you want appears. Then go
to return the
STOP
Getting started
1.23