Muratec MFX-1500E Operating Instructions Manual page 17

11
— Press to begin a fax transmission or reception.
START
12
— Resets copying settings to their defaults.
CLEAR ALL
13
— An all-purpose "Whoa!" key. Stops the current operation and ejects a
STOP
document from the document feeder.
14
— Press to send a broadcast fax (sending the same document to
BROADCAST
more than one location).
15
— Instructs the fax to scan either letter- or legal-sized docu-
BOOK DOC SIZE
ments when you use the flatbed scanner.
16
/ — Starts a speed-dialing operation, which you finish by
SPEED DIAL TEL INDEX
pushing three of the keys on the numeric keypad. Also displays one-touch and
speed-dial entries sorted alphanumerically, as in a telephone directory.
17
— Press to delete characters on the
CANCEL
have entered into the machine.
18
In Fax mode:
/ — Redials the last number you dialed. In certain operations, it
REDIAL PAUSE
also produces a special pause character which can be useful when dialing
long-distance numbers.
Or, in Copy mode:
? — Selects the printout paper you want to use.
PAPER SIZE
19
— Much as is a "Whoa!" key,
ENTER STOP
settings, begins operations and moves through command levels.
20
In Fax mode:
— Press this to insert special symbols into telephone num-
DIALING OPTIONS
bers (see page 2.7).
Or, in Copy mode:
— Press this key to toggle the sorting of printed copies.
SORT COPY
21
In Fax mode:
/ — Scrolls (moves) through features and command options as dis-
PROGRAM
played on the .
LCD
Or, in Copy mode:
Press to increase the reduction or enlargement rate at 1% intervals.
22
In Fax mode:
— Press this to set up a fax transmission to a call group, a set of
GROUP DIAL
fax numbers which will receive the same document in one fax operation.
Or, in Copy mode:
% — Press this key to choose one of several fixed copy enlargement
ENLARGE
rates. (See page 1.31 for more information.)
and cancel commands you
LCD
is a "Go!" key. It confirms user
ENTER
23
In Fax mode:
— Scrolls (moves) through features and command options as displayed on
the .
LCD
Or, in Copy mode:
Press to decrease the reduction or enlargement rate at 1% interval.
While scanning a document:
— Press to tell your machine to scan one or more additional documents
NEXT
after the current scanning ends.
24
In Fax mode:
— Chooses from among several fax options: delayed
COMMUNICATION OPTIONS
transmission, SecureMail transmission, relay broadcast, polling, batch trans-
mission or F-Code communication.
Or, in Copy mode:
% — Press this key to choose one of several preset copy reduction
REDUCE
rates. (See page 1.31 for more information.)
25
— Press to toggle among the three resolution modes and
RESOLUTION
grayscale.
26
— Press to enter the contrast setting mode. To change the contrast
CONTRAST
level, press or keys.
27
/ — Press this key to toggle between Fax mode or Copy mode.
COPY FAX
Getting started
1.5