Tti Transmission; Quick Memory Transmission - Muratec F-320 Operating Instructions Manual

Changing the default settings
Memory transmission
Default setting: ON.
Note: When the machine's memory is full, it can transmit only through the docu-
ment feeder (real time transmission).
To change the default setting of memory transmission:
1
Press , 2, 2, 0, 6,
MENU ENTER
Memory Tx
$ $ # #
/ /Enter
2
Press or until the mode you want appears.
3
Press to save the setting.
ENTER
If the
MEMORY TRANSMIT
If the
MEMORY TRANSMIT

Quick Memory transmission

Default setting: ON.
Important: Your fax machine's memory transmission feature must be turned on
to use Quick Memory transmission (see above).
To change the default setting of Quick Memory transmission:
1
Press , 2, 2, 0, 7,
MENU ENTER
Quick Tx
$ $ # #
/ /Enter
2
Press or until the mode you want appears.
3
Press to save the setting.
ENTER
4.2
. The shows:
LCD
:On
light glows, memory transmission is on.
light doesn't glow, memory transmission is off.
. The shows:
LCD
:On

TTI transmission

Default setting: ON.
Every fax page you send arrives at the receiving machine with a single line of text
at the very top of the page. This text lists a name, called the Transmit Terminal
Identifier ( ), and a fax number. You can set the machine to not send the
TTI
1
Press , 2, 2, 0, 8, . The
MENU ENTER
TTI Tx :On
$ $ # #
/ /Enter
2
Press or until the mode you want appears.
3
Press to save the setting.
ENTER
TTI
shows:
LCD
.