Reviewing Or Canceling Commands - Muratec F-320 Operating Instructions Manual

Basic operation
To redial a fax call manually with the
handset:
1
Make sure the document is in the
trast are set.
2
Press / or lift the optional handset to get a dial tone.
MONITOR CALL
3
Press ( ). The
REDIAL LCD
View Redial History
0:1234567890
4
Your machine can remember the last 10 dial numbers. Press
dial number you want to redial appears.
5
When you hear fax tones from the remote unit, press
Note: If a person answers the phone, use the optional handset to tell that
person you're sending a fax. When you hear fax tones, press
To redial a voice call manually using the optional handset:
1
Lift the optional handset to get a dial tone.
2
Press ( ). The
REDIAL LCD
View Redial History
0:1234567890
3
Your machine can memory the latest 10 dial numbers. Press
dial number you want to redial appears.
4
Press .
START
When the other person answers, use the optional handset to speak to that
person.
2.6
/ key or an optional
MONITOR CALL
and that the document mode and con-
ADF
will show:
.
START
will show:

Reviewing or canceling commands

Your fax machine can store many "jobs" in its memory. It also keeps track of each
command by assigning it a command number, like "C01."
Delayed commands, redial attempts and current fax transmissions are all stored in
your fax machine's memory and given a command number.
Your machine can store up to 99 delayed commands. It identifies each by a two-digit
command number from 01 to 99.
The Review Commands function gives you the power to check on each job (or com-
mand) in your machine's memory. It also allows you to cancel a command of fax
transaction if you decide not to send the document.
or until the
To see your machine's stored commands or to cancel them:
1
Press
COMM
C01:5552009
.
START
• The
the phone number it will dial.
• If your machine is attempting to perform a command now, it appears on
the display.
Note: If there are no stored commands in your machine, the
or until the
Here, you see Command No. : 01, and the number it's set to dial. If the com-
mand is to send a broadcast, "Broadcast" appears instead of the phone
number. (For more information of "Broadcasting," see page 3.9.)
If the command is to send a batch transmission, the
number (such as "B01") rather than the command number. (For more informa-
tion of "Batch transmission," see pages 3.11–3.13.)
If the command is for a Call group dialing, the group number (such as "G01")
appears instead of the phone number. (For more information of "Call group
dialing," see pages 3.6–3.7.)
2
Press
. / . The will show:
CANCEL CONFIRM LCD
$ $ # #
" "
/ / /Cancel
shows the first command, indicated by its command number and
LCD
No Command
Comm.Cancel/Stop
Press to return to standby mode.
STOP
Or, if you want to see the result of fax transaction, press
/ . (See "View the result of fax transaction" on page 2.7.)
CEL CONFIRM
or to scroll through currently stored commands.
will show:
LCD
. -
COMM CAN
shows its batch box
LCD