Call Group Dialing - Muratec F-320 Operating Instructions Manual

Advanced features

Call group dialing

If you frequently send the same fax message to more than one location, store the
one-touch key(s) or speed-dial number(s) into a group.
After you store, you can send the same fax to many different locations by pressing
/ .
SPEED DIAL GROUP
Entering or changing a call group
1
Press , 1, 3, 1,
MENU ENTER
Enter Group No.
01:No Number Stored
Note: If a group number other than 01 appears on the
you have already entered numbers for 01.
2
Press or to select the group number in which you want to store a num-
ber or change a previously stored number.
Note: You can select the group number by directly entering that two-digit
identifier code. When entering the identifier code for group numbers
less than 10, you must enter leading zero to make two digits. For exam-
ple, 01-09.
3
Press . The shows:
ENTER LCD
01:Enter One-T/Speed
4
Enter all the one-touch number(s) or the speed-dial number(s) you want to
store into the group number by pressing the one-touch key or
/ and the numeric keypad. A comma will be automatically
SPEED DIAL GROUP
inserted between each number.
01:Enter One-T/Speed
[01],[03],S002
Your can show only 20 characters at a time. To view characters beyond
LCD
those 20, press to scroll to the left or
5
When all numbers are entered, press
6
The will display the next empty group number.
LCD
If you do want to enter numbers for another group number, go back to step 2.
If you do not want to enter any more numbers, press
standby mode.
3.6
. The shows the empty group number:
LCD
, it means that
LCD
to scroll to the right.
to store it.
ENTER
to return to
STOP
Erasing a call group
1
Press , 1, 3, 2, . The
MENU ENTER
Enter Group No.
01:[01],[03],S002
2
Press or to select the group number you want to erase.
Note: You can select the group number by directly entering that two-digit
identifier code. When entering the identifier code for group numbers
less than 10, you must enter leading zero to make two digits. For exam-
ple, 01-09.
3
Press . The following two displays will appear alternately:
ENTER
01:Erase Group Dial
Yes Enter
Note: If you want to quit without erasing the group number you've selected,
press . The fax will return to step 2.
CANCEL
4
Press to erase the number.
ENTER
To erase another group number, repeat steps 2–4.
Otherwise, press to return to standby mode.
STOP
Send a fax via call group
Note: The call group dialing can be used only with memory transmission.
1
Place the document in the
ADF
sary.
2
Press / twice.
SPEED DIAL GROUP
Enter Group No.
G
3
Use the numeric keypad to enter the group number you want to send a fax.
Note: If you want to send a fax to several groups at a time, press
then repeat steps 2–3. Also, you can include the one-touch location,
speed-dial location and up to 30 manually dialed number. (See
"Broadcasting," page 3.9.)
4
Press .
START
shows:
LCD
01:Erase Group Dial
No Cancel
. Adjust document mode and contrast if neces-
BROADCAST