L Left Hand Unit Lift/Lower Switch; M, N, P, Rindicator Lamps; Sweight Transfer Button - Ransomes Highway 3 Safety, Operation & Maintenance Manual

6.2L LEFT HAND UNIT LIFT/LOWER SWITCH _____________________________
To lower the cutting unit move the switch lever forward.
To raise the cutting unit move the switch lever rearwards
NOTE:
The Yellow PTO LED will illuminate when the
PTO is selected. The Green LED indicates
the unit is below 400mm, therefore with both
are illuminated the reel will be rotating.
If the lever is pulled momentarily rearwards
the unit will raise to the cross cut position and
continue to rotate for 3 seconds. Lowering
the unit within 3 seconds will let the reel
continue rotating without stopping.
If the lever is held and the unit lifts above the cross
cut position the unit will continue to lift and the reel will stop rotating at 400mm. The lift will stop
when the lever is released.
6.2M, N, P, R INDICATOR LAMPS _________________________________________
M PTO engaged
N Right hand cutting unit in cutting position.
P Centre hand cutting unit in cutting position.
R Left hand cutting unit in cutting position.
6.2S WEIGHT TRANSFER BUTTON ______________________________________
To activate press and hold button.
If poor traction is anticipated due to localized
ground conditions, use of this control will
provide weight transfer to the traction wheels.
6 CONTROLS
M
N
P
R
en-37