Seat (Grammer Msg85) - Ransomes Highway 3 Safety, Operation & Maintenance Manual

9 ADJUSTMENTS
9.10

SEAT (GRAMMER MSG85) ___________________________________________

The seat can be adjusted for leg reach, back rest angle and
operator weight to provide a comfortable position for
operating the machine.
A. FORE AND AFT ADJUSTMENT
To Adjust:
The position of the adjusting lever (A) is on the right hand
side of the seat below the seat cushion. By pulling the lever
up, the seat can be slid backwards and forwards, when in
the desired position release the lever to locate in one of the
pre set positions.
B. BACK REST ADJUSTMENT
To Adjust:
The position of the release lever (B) is on the left
hand side of the seat. While sitting on the seat pull
the release lever upwards to release the back rest.
(The back rest is spring loaded to fold onto the seat
cushion.) Lean back to obtain the desired position
for the back rest and release the lever to locate in
one of the pre set positions.
C. WEIGHT ADJUSTMENT
To Adjust:
The position of the operator weight adjust lever (C)
is on the front of the seat. To change the operator weight sitting pull the lever out and rotate the lever while sitting
on the seat.
D. HEIGHT ADJUSTMENT
To adjust:
When sitting on the seat the height can be adjusted by holding the edge of the seat cushion, pushing your weight
down and lifting as the cushion as the suspension returns to its normal position. There are three pr-set positions,
once the highest has been achieved the seat returns to its lowest position.
NOTE:The seat is fitted with a microswitch to sense operator presence.
When the machine is fitted with an ROPS frame or ROPS cab a lap belt is fitted and should be worn at all times
en-71