Machine Specification; Hydraulic Specification - Ransomes Highway 3 Safety, Operation & Maintenance Manual

4 SPECIFICATION

4.2 MACHINE SPECIFICATION ______________________________________________

Frame construction:
Cutting unit drive:
Transmission:
Speeds:
Cutting:
Transport:
Steering:
Ground pressure:
Brakes:
Fuel Tank Capacity:
Hydraulic Tank Capacity:
Battery:

4.3 HYDRAULIC SPECIFICATION ____________________________________________

Description
Transmission
Forward
Reverse
Charge
Cutting
Forward
Reverse
Steering & Lift
Steering
Lift
Weight Transfer
en-12
Heavy duty formed steel chassis with box section frame rails.
Fixed displacement hydraulic motors.
Four wheel drive on demand. Direct coupled variable displacement pump to direct
coupled 200cc/rev front, 160cc/rev rear wheel motor.
0 - 12 km/h Forward
0 - 12 km/h Reverse
0 - 25 km/h Forward
0 - 05 km/h Reverse
Hydrostatic power steering, with adjustable tilt steering wheel.
1 kg/cm² (Dependent on tyre pressures and accessories fitted)
Hydrostatic braking with hydraulic parking brakes on front wheels.
43 litres
36 litres
Exide 093 (SAE 500)
Liters / Minute.
95
45
-
36
36
10
10
-
Relief Valve Pressure
250bar
250bar
18bar
250bar
250bar
125bar
125bar
0 - 25bar
Test Port Location
see section 8.6
see section 8.6
see section 8.6
see section 8.6
see section 8.6
see section 8.6