Fujitsu Primergy RX300 S4 User Manual page 55

10
When a message prompts you to insert the OS CD/DVD, insert the CD/DVD
and click [OK].
For Windows Server 2008
1. Insert the OS CD/DVD (Installation disc).
Copying files starts.
After files are copied, a message prompts you to eject the CD/DVD and floppy disk.
For Windows Server 2008 (64-bit), a message appears and prompts you to insert the PRIM-
ERGY Startup Disc again. Insert PRIMERGY Startup Disc. After files are copied, a message
prompts you to eject the CD/DVD.
For Windows Server 2003 / Windows Server 2003 x64
1. Insert the OS CD/DVD (Installation disc).
The license agreement window appears.
2. Click [Accept].
After files are copied, a message prompts you to eject the CD/DVD and floppy disk.
For Windows Server 2003 R2 / Windows Server 2003 R2 x64
1. Insert the OS CD/DVD (Installation disc) Disc 1.
The license agreement window appears.
2. Click [Accept].
After files are copied, a message prompts you to insert the Disc 2.
3. Insert the OS CD/DVD (Installation disc) Disc 2.
After files are copied, a message prompts you to eject the CD/DVD and floppy disk.
11
Eject the CD/DVD and floppy disk and click [OK].
For Windows Server 2008 (64-bit), do not eject the floppy disk. Doing so stops automatic
installation.
The system is restarted.
The system continues the installation operation after restart.
Setup of OS GUI and installation of LAN utility and Active Directory are performed
automatically.
12
When a confirmation message to restart appears, click [Restart].
The system restarts and installs high reliability tools.
Thus the Command Prompt windows may appear and disappear during installation of
ServerView, the installation process is properly proceeding.
PRIMERGY RX300 S4 User's Guide
55