Fujitsu Primergy RX300 S4 User Manual page 199

Item
Setup Password
System Password
Set Setup Password
Setup Password Lock
Set System Password
System Password Mode
System Load
Setup Prompt
Virus Warning
Diskette Write
Flash Write
TPM (Security Chip)
Setting
table: Items on the Security Menu
Setting
Displays whether or not the setup password required for the setup is set.
When the password is not set, "Not Installed" is displayed. When the password is
set, "Installed" is displayed.
Displays whether or not the system password is set.
When the password is not set, "Not Installed" is displayed. When the password is
set, "Installed" is displayed.
Sets the setup password. A setup password prevents starting the BIOS Setup
without permission.
Select this field and press the [Enter] key, and then input the setup password.
For how to set, change, or delete the password, see "8.4.2 Security against
Unauthorized Use" ( p.231).
• Standard (Initial value)
• Extended
Sets the system password. The system password prevents unauthorized access to
the system.
The setup password must already be set.
Select this field and press the [Enter] key, and then input the system password.
For how to set, change, or delete the password, see "8.4.2 Security against
Unauthorized Use" ( p.231).
• System (Initial value)
• Keyboard
• Standard (Initial value)
• Diskette/CDROM Lock
• Disabled
• Enabled (Initial value)
Disabled (Unchangeable)
• Disabled
• Enabled (Initial value)
• Disabled
• Enabled (Initial value)
Sets TPM (Security Chip).
"7.2.12 TPM (Security Chip) Setting Submenu" (p.200)
PRIMERGY RX300 S4 User's Guide
Description
Sets the range of protection by the setup password.
The setup password must already be set.
Sets the range of protection by the system
password. The setup password and the system
password must already be set.
Sets whether to enable or disable system startup
from a floppy disk or CD/DVD drive.
Sets whether or not to display the setup message
"<F2> BIOS Setup / <F12> Boot Menu" in the
POST screen when system is restarted.
Sets whether or not to check if the boot sector of the
hard disk drive has been changed since the previous
system startup. If the boot sector is changed without
a clear reason, it is necessary to scan the system for
computer viruses with a virus detection program.
Sets whether or not to protect against writing to
floppy disks.
Sets whether or not to protect against writing to the
system BIOS.
199