Windows Server 2003 - Fujitsu Primergy RX300 S4 User Manual

Chapter 4 Operations after OS Installation
Creating backup data
Perform backup for the whole server configuration according to the following procedure.
1
Click [Start] – [All Programs] – [Windows Server Backup].
2
Select [Backup Once] from the operation menu.
3
Select [Full server] in [Select backup configuration].
4
Select [Remote shared folder] in [Specify destination type].
5
Select the options as required, and start backup.
When backup has completed, the status (succeeded or failed) is displayed in the message part of
the [Windows Server Backup] window.

4.2.2 Windows Server 2003

When installing Windows Server 2003, create the Automated System Recovery (ASR) set. To create it,
an unused formatted floppy disk and media to store the backup file are required.
Only system information can be restored by using the Automated System Recovery (ASR) set that is
created in this procedure. Data such as files created by customers are not included. Regular data
backup using a backup device is recommended. For backup, refer to "8.5 Backup" ( p.234).
1
Click [Start] – [All Programs] – [Accessories] – [System Tool] – [Backup].
The [Backup or Recovery Wizard] window appears.
2
Click [Next].
The [Backup or Recovery] window appears.
3
Select [Create a backup of files and settings], and then click [Next].
The [Items to Create Backups] window appears.
4
Select [All the information in this computer], and then click [Next].
The [Backup Type, Destination and Name of the Backup File] window appears.
5
Enter a name and a destination for the backup file, and then click [Next].
The [Backup or Recovery Wizard Complete] window appears.
82
Specify a shared folder or DVD drive on a server other than the device's server as a backup
destination.