Fujitsu Primergy RX300 S4 User Manual page 172

Chapter 6 Installing Internal Options
7
Remove the USB unit.
1. Push the ejector in the direction of the arrow (on the front) while holding up the USB
unit lock (green) inside of the server to unlock it.
2. Remove the USB unit from the server.
[Front]
8
Remove the cables inside of the server and open the holder of the 3.5-inch
storage bay while pressing the tabs.
The holders are on both sides of the server. Open both of them in the same way.
Power connector
172
Ejector
USB unit
SAS connector
USB connector
(1)
USB
unit lock
(2)
Tabs
Holder