Fujitsu Primergy RX300 S4 User Manual page 137

4
Slide out the server.
Hold the handle and slide out the server until it clicks, and the server is locked on the rail on both
sides.
5
Slide back the top cover while pushing the button on both sides.
6
Slowly lift up the top cover and remove it from the server.
How to attach the top cover
To attach the top cover, reverse the removing procedure.
Lock
Handles
• Be careful not to pinch fingers or clothes when sliding out the server or pushing
it back. Failure to do so may cause injury.
Buttons Top cover
• Before attaching the top cover, make sure no unnecessary parts or tools are
left inside the server.
• When turning on the server, make sure the top cover is closed.
PRIMERGY RX300 S4 User's Guide
137