Fujitsu Primergy RX300 S4 User Manual page 51

2
Insert the ServerStart floppy disk supplied with the server. Make sure that "on
local drive (floppy/USB stick)" and "A:" are selected and click [Continue].
Set the ServerStart floppy disk in the write-enabled state.
When installing the OS not using the ServerStart floppy disk, select [RAM disk] and click [Cre-
ate].
The [Initialization of ServerStart core running] window appears and the ServerStart initialization
process starts. Depending on hardware configuration, this process may take a few minutes. After
completion, the license agreement window appears.
PRIMERGY RX300 S4 User's Guide
51