Installable Memory Board/Memory Modules, And Notes - Fujitsu Primergy RX300 S4 User Manual

Chapter 6 Installing Internal Options
When installing one memory board
Pair memory modules with the same capacity in a memory bank, and install the memory modules in
ascending order of memory capacity from memory bank 1 – memory bank 2 – memory bank 3.
6.4.2 Installable Memory Board/Memory Modules, and
Notes
Installable memory board/memory modules
The following types of memory board/memory modules can be installed on this server.
Product name
Memory Expansion Board
Memory Module -1GB
Memory Module -2GB
Memory Module -4GB
Memory Module -8GB
Before installing option memory modules, see "Appendix B.2 Memory" ( p.247) and "B.3 Memory
Board" ( p.247) to check the packaged products.
How to identify a memory module
Make sure that the two memory modules (DIMMs) in each set have the same number beginning with
"CA" (e.g. CA05946-E101) on their DIMM label.
When an identification label is attached, make sure that the two memory modules (DIMMs) in each set
have the same capacity and that their identification label is attached at the same position.
• Identification label location
Identification label A
146
table: List of installable memory board/memory modules
Product ID
PG-RB108
PG-RM1CG
PG-RM2CG
PG-RM4CG
PG-RM8CG
Identification label B
Remarks
Memory board option
DDR2-667 FBD 512MB × 2
DDR2-667 FBD 1GB × 2
DDR2-667 FBD 2GB × 2
DDR2-667 FBD 4GB × 2
Identification label C