Setting The Encrypted Reception - Kyocera FAX System 10 Operation Manual

Using Convenient Fax Functions > Encryption
6
7
8

Setting the Encrypted Reception

To conduct encryption communication operating the receiving system, follow the steps below.
1
2
3
Select the encryption box.
If you need to select an encryption box, set the box.
1
[Encryption Box] > [On] > [Box No.]
2
Enter the box number (0000 to 9999) with the numeric keys.
Finish the encrypted transmission settings.
[OK] > [OK] > [OK]
Send Start.
Press the [Start] key.
The transmission will start.
NOTE
When [On] is selected in [Dest. Check before Send], a destination confirmation screen is
displayed when you press the [Start] key.
Confirmation Screen of Destinations (page 7-13)
Register the encryption key ahead of time.
Register the encryption key that you decided upon with the sender.
For the procedure for registering an encryption key, refer to the following:
Registering an Encryption Key (page 5-34)
Display the screen.
[System Menu] key > [FAX] > [Next] of "Reception"
Turn on encrypted reception.
1
[Change] of "Encrypted Reception" > [On]
2
Select the encryption key number that you used to register the encryption key that you
decided upon with the sender.
3
Select [OK].
The machine receives the encrypted originals from the sender of the specified encryption
key.
5-36