Continuous Scan; Job Finish Notice; File Name Entry - Kyocera FAX System 10 Operation Manual

Sending Faxes > Continuous Scan

Continuous Scan

Scans a large number of originals in separate batches and then produce as one job.
Originals will be scanned continuously until you select [Finish Scan].
Select [On] to use continuous scanning. To use Job Build, select [Job Build]. You can set the functions that appear on
the screen during scanning.
(Value: [Off] / [On])

Job Finish Notice

Sends E-mail notice when a job is complete.
Users can be notified of the completion of a job while working at a remote desk, saving the time spent waiting beside the
machine to finish.
NOTE
PC should be configured in advance so that E-mail can be used.
Machine's Operation Guide
E-mail can be sent to a single destination.
It is possible to attach an image to the e-mail notice.
Job Finish Notice Setting (page 8-4)

File Name Entry

Adds a file name.
Additional information such as job number and date and time can also be set. You can check a job history or job status
using the file name, date and time, or job number specified here.
Select [File Name], enter the file name (up to 32 characters), and select [OK].
To add date and time, select [Date and Time]. To add job number, select [Job No.]. The added information will be
displayed in "Additional Info".
3-24