Sending Faxes > Original Orientation
Original Orientation
To scan the original in the correct orientation, specify which side of the original is the top. To set a 2-sided original,
the orientation of the placed original must be set.
Select original orientation from [Top Edge on Top], [Top Edge on Left] or [Auto].
Item
Top Edge on Top
Top Edge on Left
2-sided/Book Original
Select the type and orientation of the binding based on the original.
Item
1-sided
2-sided
Binding
Original
Orientation
Book
Binding
Original
Orientation
Long Original
Reads long-sized original documents using a document processor.
(Value: [Off] / [On])
NOTE
Only a single side of a long original cannot be scanned.
Originals of up to 1,600 mm/63" long can be scanned.
Original
Original
Value
―
"2-sided/Book Original" is not set.
Binding Left/Right,
Select the binding orientation of originals.
Binding Top
Top Edge on Top,
Select the orientation of the original document top edge to scan
Top Edge on Left
correct direction. Select [Original Orientation] to choose orientation
of the originals, either [Top Edge on Top] or [Top Edge on Left].
Then select [OK].
Binding Left,
Select the binding orientation of originals.
Binding Right
Top Edge on Top
―
3-21
Image
Original orientation
Original orientation
Description