Interrupt Send - Kyocera FAX System 10 Operation Manual

Sending Faxes > Interrupt Send

Interrupt Send

During communication, when you scan originals by selecting direct transmission, you can use interrupt send. Even when
the communication is prolonged due to broadcast transmission or a next transmission being scheduled, the machine will
first send originals for which interrupt send has been set.
NOTE
When the total number of standby transmissions and delayed transmissions has already reached 220, you cannot use

interrupt send.

1
2
3
4
5
Select [FAX] on the Home screen.
Load the originals to be sent using Interrupt Send.
Select [Direct].
For operation of direct transmission, refer to the following:
FAX Direct Transmission (page 3-27)
Set the destination, and press the [Start] key.
The originals are left in queue, and the transmission will start when transmission becomes
possible.
NOTE
When [On] is selected in [Dest. Check before Send], a destination confirmation screen is
displayed when you press the [Start] key.
Confirmation Screen of Destinations (page 7-13)
To cancel transmission while waiting for interrupt send, select the [Stop] key on the
operation panel or [Cancel] on the touch panel.
Cancelling Direct Transmission (page 3-27)
When the interrupt send is completed, the waiting communication and
standby transmission will automatically resume.
3-31