Media Type For Print Output - Kyocera FAX System 10 Operation Manual

Receiving Faxes > Media Type for Print Output

Media Type for Print Output

Specify the paper type to be used for print output of the received fax.
1
2
3
4
Supported paper types
For more information about configuring settings, refer to the following:
Media Type (page 8-10)
Setting the cassette for the print output of received faxes
By specifying the media type, faxes can be received on the corresponding cassette.
Display the screen.
[System Menu] key > [Cassette/MP Tray Settings]
> [Next] of "Cassette1-4" or "MP Tray Setting"
Select the cassette that you want to use for fax reception.
Selecting the paper size.
1
Select [Change] of "Paper Size".
2
Inch models: [Auto] > [Inch]
Metric models: [Auto] > [Metric]
IMPORTANT
Specify the settings as follows for the cassette that you want to use for fax reception.
Inch models: [Auto] > [Inch]
Metric models: [Auto] > [Metric]
3
Select [OK].
Selecting the paper type.
1
Select [Change] of "Media Type".
2
Select the paper type.
3
Select [OK].
Set the paper type.
Configure paper settings for fax reception. When selecting the paper type, select the same
paper type as you selected in step 3.
For more information about configuring settings, refer to the following:
Media Type (page 8-10)
All Media Types, Plain, Rough, Vellum, Labels, Recycled, Bond,
Cardstock, Color, Envelope, Thick, Coated, High Quality, Custom 1-8
4-6