Save Mode - Sanyo SAP-KRV91EH Technical & Service Manual

6. Save Mode

NOTE
OI-275-23EG
Operation with the Remote Control Unit (continued)
This mode fixes the temperature setting and reduces the operating
current to allow energy-conserving operation friendly to the
environment.
Press during operation or while stopped.
To cancel, press again.
Save mode uses the following operation settings.
•
Temperature setting
(official
recommended)
Heating
20 °C
operation
Cooling
28 °C
operation
The temperature setting is not displayed on the remote control unit.
•
The airflow direction and fan speed settings only can be changed.
(These settings are stored.)
During dry operation, the room temperature at dry save operation is
•
used as the temperature setting (from 20 °C to 28 °C). Also, the
airflow direction is the flap position before the Save setting was
made.
The settings for the mode selected automatically are used during
•
automatic operation.
SAVE mode does not function during FAN mode.
•
In the interest of environmental preservation and energy
•
conservation, the temperature settings used are the officially
recommended values of 28 °C for cooling and 20 °C for heating. This
allows economical operation using minimum capacity. However,
return the air conditioner to normal operation if this type of
operation is not suitable.
Save mode can be used with all operation modes, including 1-hour
•
timer and Night Setback mode. When used with other modes, Save
mode is given precedence. (However, Night Setback mode is given
precedence when used with Save mode if the settings are the same.)
During operation in Save mode, no changes can be made in the
•
temperature or amperage.
During cooling operation, irregular flap swing and fan speeds are
•
used to maintain a comfortable environment.
Airflow direction
Flap position before
the Save setting
Swing
Ampere
display
23