Sanyo SAP-KRV91EH Technical & Service Manual page 55

Sensor
Display
SAVE button
1 HR. TIMER button
TIMER OFF button
Timer ON button
Back/Forward buttons
SET button
CANCEL button
CLOCK button
Reset button
NOTE
Transmitter
Sensor
Display
NIGHT SETBACK
button
TEMP. setting buttons
ON/OFF operation
button
TIMER ON button
TIMER OFF button
SET button
CANCEL button
OI-275-09EG
Remote Control Unit
The illustration above pictures the remote control unit after the cover
has been lowered and removed.
When you press the buttons on the remote control unit, the
appears in the display to transmit the setting changes to the receiver in
the air conditioner.
A temperature sensor inside the remote control unit senses the room
temperature.
Information on the operating conditions is displayed while the remote
control unit is switched on. If the unit is turned off, only the mode that
was set previously is still displayed.
For details, see ''Night Setback Mode''. When you press this button in
the HEAT, DRY or COOL mode, the
the remote control unit will automatically adjust the set temperature to
save energy.
Press the button to increase the set temperature.
Press the button to reduce the set temperature.
This button is for turning the air conditioner on and off.
: The air conditioner starts at the set time.
: The air conditioner stops at the set time.
After using the TIMER ON button or TIMER OFF button to set the timer,
press this button to activate the new setting.
Press this button to cancel the current timer setting.
Transmitter
(Cover closed)
ON/OFF
operation button
TEMP. setting buttons
NIGHT SETBACK button
MODE selector button
FLAP buttons
FAN SPEED selector button
AMPERE button
A/C SENSOR button
ADDRESS switch
Battery compartment
(Pull off the cover to expose
the batteries.)
mark appears in the display, and
mark
9