Sanyo SAP-KRV91EH Technical & Service Manual page 53

Unit Display and Operation Selector (continued)
Air Conditioner Setting the air conditioner mounting location sets the swing range of the
Mounting Location horizontal airflow control flaps to positions suitable for the mounting
selector location.
POWER switch Setting the POWER switch to OFF ensures that excess power is not
consumed even when the air conditioner is plugged in. This is useful
when the air conditioner will not be used for an extended period of
time.
PEOPLE SENSOR lamp This lamp lights for approximately 15 minutes when a signal is received
from the People Sensor remote control unit.
FILTER CHECK lamp When the air filter starts to become dirty, the lamp turns orange. When
and Filter RESET button the air filter is further dirtied, the lamp changes to red. The lamp lights
for three seconds when operation starts. Clean the air filter when the
lamp turns red. Be sure to always press this button after cleaning the
filter.
7
OI-275-07EG