NOTE
1. TIMER ON mode
(Example)
2. TIMER OFF mode
(Example)
26
Using the 24-Hour ON and OFF
Timer
Before using the timer, be sure to set the current time on the remote
control unit.
After the length of time set for TIMER ON elapses, the unit begins
operating.
The display depicted at left indicates that the air conditioner will begin
operating in three hours.
Setting procedure:
STEP 1
Press the MODE button and set the desired operation
mode and press the ON/OFF operation button.
(See ''Operation with the Remote Control Unit'', page 17.)
STEP 2
Press the TIMER ON button. (
STEP 3
Use the
operation to start.
The time is set in 10-minute units. Hold down the button
to fast-forward the time.
STEP 4
Press the SET button.
The display returns to the current time once the timer is
set.
The display changes immediately to its status previous to timer
•
setting, but the
To check the status of the timer while it is counting down, press the
•
TIMER ON button. The display returns to the current time after
30 seconds.
Cancellation procedure: Press the CANCEL button.
After the length of time set for TIMER OFF elapses, the unit stops
operating.
The display depicted at left indicates that the air conditioner will stop
operating in five hours.
Setting procedure:
STEP 1
Press the TIMER OFF button. (
STEP 2
Use the
operation to stop.
The time is set in 10-minute units. Hold down the button
to fast-forward the time.
STEP 3
Press the SET button.
The display returns to the current time once the timer is
set.
The display changes immediately to its status previous to timer
•
setting, but the
To check the status of the timer while it is counting down, press the
•
TIMER OFF button. The display returns to the current time after
30 seconds.
Cancellation procedure: Press the CANCEL button.
or
buttons to set to the time that you want
indication remains.
or
buttons to set to the time that you want
indication remains.
flashes.)
flashes.)
OI-275-26EG