Operation With The Remote Control Unit; Automatic Operation - Sanyo SAP-KRV91EH Technical & Service Manual

1. Automatic Operation

NOTE
OI-275-17EG
Operation with the Remote
Control Unit
Check that the circuit breaker on the power panel is turned on and that
the operation selector of the indoor unit is in the ON position.
Once the mode is selected and the unit is preset by following the
steps below, you can have the air conditioner automatically bring the
room to the desired temperature simply by pressing the ON/OFF
operation button.
STEP 1 Press the MODE selector button to select
STEP 2 Press the ON/OFF operation button.
To stop the air conditioner, press the ON/OFF operation button again.
STEP 2
STEP 1
.
17