Function; Functions For Operation; Function 9-1. Functions For Operation - Sanyo SAP-KRV91EH Technical & Service Manual

9. FUNCTIONS

9-1. Functions for Operation

9-1-1. Operation Selector
(1) OFF :
(Self-Diagnosis)
(2) ON:
(3) TEST:
(4) DEMO:
9-1-2. Automatic Operation
Selection of Operation Mode
In Automatic Operation, indoor and outdoor temperature sensors operate and either Heating, Dry or Cooling
Operation is selected automatically.
About 22°C
About 20°C
About 18°C
9-1-3. Amperage
Operation is performed in which maximum current limit is lowered to reduce power consumption.
(Operation performance is reduced accordingly.)
Single phase 230V
Used when the remote control unit is not available
Used for servicing and maintenance
Normal operation...............Operate using remote control unit
Emergency operation ........This is used when the remote control unit is not available.
Used to confirm operational characteristics
Used for pump-down
(The unit operates at nominal frequency. In this case, a lamp on the unit will flash and it
will not accept signals from the remote control unit.)
Used for demonstration at shopfronts; not for normal use
Used for service
Room temperature
About About
15°C 22°C
Heating operation
Cooling operation 8.7
Heating operation 8.7
When ON position is selected, the air conditioner starts oper-
ating with automatic switching between cooling and heating
modes.
Set temperature
About
(standard)
27°C
Cooling
operation
Temperature at the
start of operation
(Range between
Dry
20°C and 26°C)
operation
5A
6A
22
27°C
24°C