Fan - HP EliteBook 725 G2 Maintenance And Service Manual

Fan

Description
Fan (includes cable)
Before removing the fan, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the service cover (see
a. Battery (see
b. Hard drive (see
c. Keyboard (see
d. Top cover (see
e. Heat sink (see
Remove the fan:
1. Turn the top cover upside down with the front toward you.
2. Disconnect the fan cable (1) from the system board.
3. Loosen the two Phillips captive screws (2) that secure the fan to the system board.
4. Remove the fan (3).
Service cover on page
Battery on page 40)
Hard drive on page 42)
Keyboard on page 52)
Top cover on page 58)
Heat sink on page 71)
38), and then remove the following components:
Component replacement procedures
Spare part number
780895-001
73