Top Cover - HP EliteBook 725 G2 Maintenance And Service Manual

2. Detach the RTC battery (2) from the top cover. (The RTC battery is attached to the top cover with
double-sided adhesive.)
3. Remove the RTC battery and cable.
Reverse this procedure to install the RTC battery.

Top cover

Description
Top cover
Before removing the top cover, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the service cover (see
a. Battery (see
b. Hard drive (see
c. Keyboard (see
NOTE: When replacing the top cover, be sure that the following components are removed from the
defective top cover and installed on the replacement top cover:
Remove the top cover:
58 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Service cover on page
Battery on page 40)
Hard drive on page 42)
Keyboard on page 52)
38), and then remove the following components:
Spare part number
783215-001