4.
Remove the display assembly (2).
5.
If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a.
Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of
the display bezel until the bezel disengages from the display back cover.
b.
Remove the display bezel (4).
The display bezel is available using spare part numbers 775896-001 (for use only on computer
models equipped with and AntiGlare, FHD, LED, UWVA display panel) and 766012-001 (for use only
on computer models equipped with an AntiGlare, HD, LED, SVA display panel.)
6.
If it is necessary to replace the display panel:
Component replacement procedures
63