Hard Drive - HP EliteBook 725 G2 Maintenance And Service Manual

Hide thumbs Also See for EliteBook 725 G2:
Table of Contents

Advertisement

Hard drive

NOTE:
The hard drive spare part kit does not include the hard drive bracket, hard drive connector adapter,
or screws. The hard drive bracket, hard drive connector adapter, and screws are included in the Hard Drive
Hardware Kit, spare part number 730539-001.
Description
1-TB, 5400-rpm, SATA, 7.0-mm hard drive
500-GB, 7200-rpm, SATA, 7.0-mm hard drive
500-GB, 7200-rpm, SED, 7.0-mm hard drive
500-GB, 5400-rpm, SATA, FIPS, 7.0-mm hard drive
320-GB, 7200-rpm, SATA, 7.0-mm hard drive
Before removing the battery, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the service cover (see
5.
Remove the battery (see
Remove the hard drive:
1.
Loosen the four Phillips captive screws (1) that secure the hard drive to the computer.
42
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Service cover on page
Battery on page
40).
38).
Spare part number
762990-001
703267-001
703268-001
730946-001
634862-001

Advertisement

Table of Contents
loading

Table of Contents