Solid-State Drive - HP EliteBook 725 G2 Maintenance And Service Manual

Solid-state drive

Description
512-GB, SATA-3, TLC, solid-state drive
256-GB, SATA-3, SED, Opal 2, solid-state drive
256-GB, SATA-3, Opal 2, locked, solid-state drive
256-GB, SATA-3, TLC, solid-state drive
240-GB, SATA-3, solid-state drive
180-GB, SATA-3, SED, Opal 2, solid-state drive
180-GB, SATA-3, SED, Opal 1, solid-state drive
180-GB, SATA-3, solid-state drive
128-GB, SATA-3, solid-state drive
128-GB, SATA-3, TLC, solid-state drive
Before removing the solid-state drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the service cover (see
5. Remove the battery (see
Remove the solid-state drive:
1. Remove the Phillips PM2.0×2.5 screw (1) that secures the solid-state drive to the system board. (The
solid-state drive tilts up.)
Service cover on page
Battery on page 40).
38).
Component replacement procedures
Spare part number
828873-001
765614-001
827868-001
800167-001
765612-001
795139-001
765611-001
765610-001
765610-001
800166-001
47