HP EliteBook 725 G2 Maintenance And Service Manual page 78

a. Release the grounding tape (1) that secures the display hinges to the display enclosure.
b. Remove the six Phillips PM2.0×3.0 broad head screws (2) that secure the display hinges to the
display enclosure.
c. Remove the display hinges (3).
The display hinges are included in the Display Hinge Kit, spare part number 775895-001.
10. If it is necessary to replace the WLAN antenna cables and transceivers:
a. Detach the WLAN antenna transceivers (1) from the display back cover. (The WLAN antenna
transceivers are attached to the display back cover with double-sided adhesive.)
b. Release the WLAN antenna cables from the clips (2) built into the left and right sides of the
display enclosure.
66 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts