Solid-State Drive - HP Envy x360 Maintenance And Service Manual

not cause an external puncture or rupture to the battery. Punctures and ruptures can cause a
● Do
short inside the battery, which can result in battery thermal runaway.
● not handle or touch the battery enclosure with sharp objects such as tweezers or pliers, which
Do
might puncture the battery.
not compress or squeeze the battery case with tools or heavy objects stacked on top of the
● Do
case. These actions can apply undue force on the battery.
not touch the connectors with any metallic surface or object, such as metal tools, screws, or
● Do
coins, which can cause shorting across the connectors.
Before removing the battery, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
WARNING!
computer, a replacement battery provided by HP, or a compatible battery purchased from HP.
IMPORTANT:
information. To prevent loss of information, save your work or shut down the computer through
Windows before you remove the battery.
Remove the battery:
1. Disconnect the battery cable (1) from the system board.
2. Remove the five Phillips M2.0 × 3.5 screws (2) that secure the battery to the computer.
3. Remove the battery (3).
To install the battery, reverse the removal procedures.
NOTE: When replacing the battery, be sure to completely reassemble the computer and plug in the
AC adapter before turning the computer on.

Solid-state drive

To remove the solid-state drive, use this procedure and illustration.
32 Chapter 5 Removal and replacement procedures for authorized service provider parts
Bottom cover on page
To reduce potential safety issues, use only the user-replaceable battery provided with the
Removing a battery that is the sole power source for the computer can cause loss of
Preparation for disassembly on page
30).
30).