Table of Contents
Advertisement
2.
Press down on the module until the side retention clips snap into place (3).
Solid-state drive
To remove the M.2 solid-state drive, use this procedure and illustration.
Table 5-4
Solid-state drive descriptions and part numbers
Description
1 TB, PCIe
512 GB, PCIe
256 GB, PCIe
128 GB, PCIe, TLC
Before removing the solid-state drive, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the solid-state drive:
1.
Remove the Phillips M2.0 × 2.5 screw (1) that secures the drive to the computer.
36
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover and rubber feet on page
Battery on page
33).
Spare part number
L85370-005
L85364-005
L85354-005
M06792-005
31).
31).
Advertisement
Table of Contents
