Table of Contents
Advertisement
To replace the speakers, reverse the removal procedures.
Solid-state drive
To remove the SSD, use this procedure and illustration.
Table 5-4
SSD descriptions and part numbers
Description
1 TB, M.2 2280, PCIe-4×4, NVMe, value SSD for use in all countries and regions except the People's
Republic of China
512 GB, M.2 2280, PCIe-4×4, NVMe, SSD for use in all countries and regions except the People's
Republic of China
1 TB, M.2 2280, PCIe-4×4, NVMe, value SSD for use only in the People's Republic of China
512 GB, M.2 2280, PCIe-4×4, NVMe, SSD for use only in the People's Republic of China
Before removing the SSD, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the computer (see
Remove the SSD:
1.
Remove the two Phillips M2.0 × 3.3 screws (1) that secure the SSD and shield to the computer.
2.
Remove the SSD shield (2).
Retain the SSD shield because you will need it when you install an SSD. The SSD shield is not
available as a spare part component.
3.
Lift the edge of the SSD (3) opposite the slot until it rests at an angle.
38
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
33).
Battery on page
Spare part number
N45474-005
N45476-005
N77394-005
N77392-005
33).
35).
Advertisement
Table of Contents
