Hard Drive - HP Mini 110 Maintenance And Service Manual
Hide thumbs
Also See for Mini 110:
- Maintenance and service manual (155 pages) ,
- Reference manual (103 pages) ,
- User manual (93 pages)
Table of Contents
Advertisement
Hard drive
Description
Hard drive:
320-GB, 7200-rpm
250-GB, 7200-rpm
160-GB, 7200-rpm
Hard Drive Hardware Kit (includes hard drive bracket, screws, and Mylar cover)
Hard Drive Cable Kit
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the following components:
a.
Battery (see
b.
Service access cover (see
Remove the hard drive:
1.
Lift the Mylar (1) that covers the hard drive connector on the system board.
2.
Disconnect the hard drive cable (2) from the system board.
3.
4.
Remove the 3 Phillips 2.0×4.0 screws (3) that secure the hard drive to the computer.
5.
Lift the Mylar (4) that covers the hard drive to allow removal of the drive.
40
Chapter 4 Removal and replacement procedures
Battery on page
35).
Service access cover on page
Download from Www.Somanuals.com. All Manuals Search And Download.
Spare part number
627731-001
635225-001
635760-001
633491-001
628532-001
38).
Advertisement
Table of Contents
