Installing 3.5-Inch Hdd Modules; Preliminary Steps; Removing A 3.5-Inch Hdd Dummy Module - Fujitsu PRIMERGY RX1330 M1 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
7.3.2

Installing 3.5-inch HDD modules

Customer Replaceable Unit
(CRU)
Tools: tool-less
7.3.2.1

Preliminary steps

Ê Locate the correct drive bay as described in section
configurations" on page
7.3.2.2

Removing a 3.5-inch HDD dummy module

Figure 78: Removing a 3.5-inch dummy module
Ê Press both tabs together (1) and pull the dummy module out of its bay (2).
V
CAUTION!
Save the dummy module for future use.
Always replace dummy modules into unused HDD bays to comply with
applicable EMC regulations and satisfy cooling requirements.
142
141.
Upgrade and Maintenance Manual
Hardware: 5 minutes
"3.5-inch HDD
RX1330 M1