Expansion cards and backup units
"Resuming BitLocker functionality" on page 84
Ê
9.4.2
Removing an expansion card
Upgrade and Repair Unit
(URU)
Tools: tool-less
9.4.2.1
Preliminary steps
"Suspending BitLocker functionality" on page 63
Ê
"Shutting down the server" on page 45
Ê
"Disconnecting the server from the mains" on page 46
Ê
"Getting access to the component" on page 47
Ê
Ê Remove the corresponding riser module as described in section
a riser module" on page
9.4.2.2
Removing the expansion card
Ê If necessary, disconnect the cables from the expansion card.
Figure 107: Removing the expansion card - example riser module 1
Ê Pull out the expansion card from the riser card slot.
172
58.
Upgrade and Maintenance Manual
Hardware: 5 minutes
"Removing
RX1330 M1