Front panel
13.3.2.2 Removing the front VGA board
Figure 175: Removing the front VGA board
Ê If the VGA cable was secured with a cable tie, pull out the cable tie (1).
Ê Remove the two screws (2) and remove the front VGA board (3).
13.3.2.3 Installing the dummy cover
Ê Install the dummy cover (see figure 173).
13.3.2.4 Concluding steps
"Installing the front panel module" on page 239
Ê
"Reassembling" on page 52
Ê
"Connecting the server to the mains" on page 55
Ê
"Switching on the server" on page 57
Ê
244
Upgrade and Maintenance Manual
RX1330 M1