Concluding Steps - Fujitsu PRIMERGY RX1330 M1 Upgrade And Maintenance Manual

Figure 185: Position on the system board
Figure 186: Installing the UFM
Ê Connect the UFM to the system board. The UFM spacer must click into the
hole on the system board.

14.3.1.3 Concluding steps

Ê Install the riser module 3 as described in section
on page 60.
"Reassembling" on page 52
Ê
"Connecting the server to the mains" on page 55
Ê
"Enabling SVOM boot watchdog functionality" on page 78
Ê
RX1330 M1
Upgrade and Maintenance Manual
System board and components
"Installing a riser module"
255