Rear Panel (Connecting Your Equipment) - Roland V-1HD+ Reference Manual

Panel Descriptions

Rear Panel (Connecting Your Equipment)

* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
DC IN jack
Connect the included AC adaptor to this jack.
* Use the cord hook to secure the cord of the
AC adaptor as shown in the illustration.
AC adaptor
RS-232 connector
You can connect this to a computer equipped with
an RS-232 connector, and remotely control this unit.
Ground terminal
Connect this to an external earth or ground if
necessary.
[POWER] switch
Turns the power on/off.
USB MEMORY port
(p. 20, 40)
Connect a USB flash drive to this port. You use it
when importing still images or when saving or
loading settings for the unit.
6
Cord hook
Power cord
To AC outlet
(p. 61)
(p. 10)
OUTPUT 1, 2 connectors
These output video. Connect projectors, displays, and recording
equipment.
* The menu of this unit is shown on the display that's connected to the
OUTPUT 2 connector.
* For each connector, you can change the output bus (PROGRAM, PREVIEW,
MULTI-VIEW) that is assigned.
TALLY connector
(p. 67)
This outputs a tally signal. Connect devices
provided with a tally-light feature.
USB port
This port is used to remotely control this unit from an external
device.
HDMI input
connector