Rear Panel / Front Panel (Connecting Your Equipment) - Roland V-600UHD Reference Manual

Panel Descriptions

Rear Panel / Front Panel (Connecting Your Equipment)

* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
* Be sure to use cables and adaptor plugs with the proper connectors matching those of the other devices you are using.
AUDIO OUT L, R connector
Output the results of audio mixing.
Connect an audio recorder, amplifier, speakers, or other such equipment.
Audio input
connectors
Pin assignment of AUDIO IN connectors
1: GND
2: HOT
3: COLD
Pin assignment of AUDIO OUT connectors
2: HOT
1: GND
3: COLD
MULTI-VIEW connector
Outputs an input/output video list (final output,
preview output, and input channels 1–8) and menus.
Connect a multi-view monitor here.
* The multi-view output is fixed at 1080p/Rec.709/
SDR/HDCP 1.4.
HDMI OUT 1–3 connectors /
SDI OUT connector
Outputs the video/audio signals. Connect projectors, recording
equipment, and external displays.
4
HDMI
input connector
RGB IN 1 connector / HDMI IN 1–4 connectors /
SDI IN 5, 6 connectors
HDMI input SDI input
connector connector
Input video and audio. Connect video cameras, BD players or other video devices, or computers.
5 The input format is detected automatically.
5 You can use the menu to check the format of the video that is input to each channel, and
* Use the menu to specify whether you will use the RGB IN 1 connector or the HDMI IN 1 connector.
AUDIO IN L, R connector
Inputs the audio signals.
Connect an audio mixer, CD players, or other such audio equipment.
Audio output
connectors
whether an HDCP signal is present.
SDI output Analog RGB
HDMI output
connector output connector
connector