Rear Panel (Connecting Your Equipment) - Roland V-1HD+ Startup Manual

Panel Descriptions

Rear Panel (Connecting Your Equipment)

* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making
any connections.
DC IN jack
Connect the included AC adaptor to this jack.
* Use the cord hook to secure the
cord of the AC adaptor as shown in
the illustration.
AC adaptor
RS-232 connector
You can connect this to a computer
equipped with an RS-232 connector, and
remotely control this unit.
Ground terminal
Connect this to an external earth or ground
if necessary.
[POWER] switch
Turns the power on/off.
USB MEMORY port
Connect a USB flash drive to this port. You use it
when importing still images or when saving or
loading settings for the unit.
4
OUTPUT 1, 2 connectors
These output video. Connect projectors, displays, and
recording equipment.
Cord hook
* The menu of this unit is shown on the display that's
connected to the OUTPUT 2 connector.
* For each connector, you can change the video bus (PGM,
PVW, MULTI-VIEW) that is assigned.
Power cord
To AC outlet
TALLY connector
This outputs a tally signal. Connect devices
provided with a tally-light feature.
USB port
This port is used to remotely control this unit from
an external device.
HDMI input connector