Connecting Your Equipment (Rear Panel / Front Panel) - Roland XS-62S Owner's Manual

Panel Descriptions

Connecting Your Equipment (Rear Panel / Front Panel)

* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
* Be sure to use cables and adaptor plugs with the proper connectors matching those of the other devices you are using.
RS-232 connector, CONTROL connector
5 A remote-control device (such as a
computer that supports RS-232) can be
connected here to remotely control the
XS-62S.
5 You use "XS-62S RCS" dedicated software
to operate the XS-62S remotely from a
connected computer (p. 36).
Grounding terminal
Connect this to an external earth or ground.
* Connect this if necessary.
[POWER] switch
This turns the power
on and off (p. 11).
Cord hook
Use the cord hook to secure the AC
adaptor cord as shown in the illustration.
* To prevent the inadvertent disruption
of power to your unit (should the
plug be pulled out accidentally), and
to avoid applying undue stress to the
jack, anchor the power cord using the
cord hook, as shown in the illustration.
SDI OUT 1, 2 connectors
HDMI OUT 1–3 connectors
This outputs the results of video mixing (PGM/1-bus video), preview
video (PVW/2-bus video), or AUX/3-bus video. Connect them to
devices such as projectors, video recorders, or external displays.
* The XS-62S has three internal output buses (PGM/1, PVW/2, and
AUX/3), and you can select the bus to output for each individual
connector (p. 16).
* In addition to outputting a list of input/output videos or outputting
the OSD menu, the HDMI OUT 3 connector can also output video at
a variety of resolutions (p. 10).
8
RS-422 connector, TALLY/GPIO connector
5 You can connect a VISCA-compatible
video camera to the RS-422 connector and
operate the camera remotely from the
XS-62S.
5 Connect devices provided with a tally-light
feature or with control-signal output
functionality to this connector.
HDMI IN 5, 6 connectors
RGB/CMPNT/CMPST IN 6 connector
SDI input connector
HDMI input connector
DC IN jack
Connect the included AC adapter to this jack.
SDI IN 1–4 connectors
These connectors input video
signals from video cameras,
video recorders, and other video
equipment.
* Channels 1 through 4 are
Analog RGB output
connector
These connectors input video signals from a computer or video
devices such as video cameras and DVD players.
* Channels 5 and 6 are allocated to the respective inputs.
* For channel 6, setting an assigned input connector is
necessary (p. 13).
Power cord
AC adaptor
Place the AC adaptor so the side with the indicator (see
illustration) faces upwards and the side with textual
information faces downwards. The indicator will light
when you plug the AC adaptor into an AC outlet.
allocated to the respective
inputs.
SDI output
connector
Component
HDMI
output output
connectors connector.
Composite
output jack
To AC outlet